adjustment of this ignition

Hello,
I would like to know how to set my delco on the V6 dautness.
What is the ignition angle?
I joint a pik of my motor.
tanks
Bruno

 

timing should be set at 5* before top dead center
engine warm at idle, 650 RPM
timing light connected to plug wire #1
vac advance disconnected

 

Tank you for your answer, but I have no stroboscopic lamp.
I want to adjut it in static with a 12 volts lampe plug on the contact of the delco, and for that I need to know where to stop the belt wheel.
bruno

 

don't think you can do that. need a timing light.

 

sounds like the way ya set the timing on old honda motorcycle engines. if so you would want the light to go out as the mark on the wheel passes 5 deg bTDC

 

Geez I quoted the wrong post...

as if this wasn't confusing enough

 

yea
but we know what you meant !
Honda Odyssey engines (FL250) are timed the same way
with a flashlight; when the light goes out, you're set !