1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Header/Steering clearance

Discussion in 'Intermediate CJ-5/6/7/8' started by High5, Nov 4, 2005.

  1. Nov 4, 2005
    High5

    High5 Member

    Urbandale, IA
    Joined:
    Jan 13, 2005
    Messages:
    802
    Hey guys,
    I have a I6 with hedman split header on it. I have some "clearance issues" that I thought would be resolved with a new bearing on the steering shaft. Well, it didn't. Do I need new motor mounts? I plan to pull the hood off tomorrow and drive a bit, but I wanted some advice beforehand. I have never changed the mounts and I doubt it has been done in at least ten years. Could the motor be torqueing enough to clang against the steering shaft??? It seems like I am always fixing something. They should have called Jeep, Fiat or Ford. "Fix it again Tony" or "fix or repair daily" because that is what I'm doing. It's no big deal now, but I don't have a heated garage and winter is coming, sometime.

    I'm learning a lot, but this is ridiculous!!!!:mad:

    High5:stout:
     
    High5, Nov 4, 2005
    #1
New Posts