1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ign Switch

Discussion in 'Early CJ5 and CJ6 Tech' started by tgregg, Oct 11, 2005.

  1. Oct 11, 2005
    tgregg

    tgregg Member

    Oak Hills, CA...
    Joined:
    Apr 14, 2005
    Messages:
    529
    I just got my new Ign switch. Looking from the bottom with (single) BAT terminal on the right I know what the 4 connected blades top and bottom are. One is for connections with accessory (bottom) and ign on at the top.
    On the left is a sngle terminal with just a "T".
    THe single blade in the middle is not marked, anyone knows were that Is suposed to connect to?
     
    tgregg, Oct 11, 2005
    #1
  2. Oct 11, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    I believe that terminal is the "trigger" or wire that goes to the "start side" of the starter solenoid.
     
    jpflat2a, Oct 11, 2005
    #2
  3. Oct 11, 2005
    ilovemyjeep

    ilovemyjeep 1971 CJ-5 w/ Dauntless V6

    Atlanta, Georgia
    Joined:
    Jul 20, 2005
    Messages:
    74
    the middle terminal is ground on my switch (dash mount)
     
    ilovemyjeep, Oct 11, 2005
    #3
New Posts