1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

YF Carb question

Discussion in 'Intermediate CJ-5/6/7/8' started by MA74CJ5, Oct 4, 2005.

  1. Oct 4, 2005
    MA74CJ5

    MA74CJ5 Member

    Bolton, MA
    Joined:
    Oct 28, 2004
    Messages:
    482
    On my 74 with a Carter YF, there is a threaded fitting that goes into the choke coil where the choke stove tube connects. In my carb there is nothing attached to that hole it is just open. Does anyone know where the tube that connects to the choke ends? Is it on the manifold? I think mine is missing and this may be due to a new intake manifold but I am not sure.
     
    MA74CJ5, Oct 4, 2005
    #1
  2. Oct 4, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The cast-iron intake/exhaust manifolds have a hole for the choke stove. There should be a tube that fits into a hole on the exhaust manifold and goes up into that hole on the choke cover (this is all from memory). You can get a "Help" kit at the parts store to replace the choke stove if the new manifolds don't have it.
     
    timgr, Oct 4, 2005
    #2
  3. Oct 4, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    here's a blow-up
    just as Tim described it
    the tube that fits in the manifold is Jeep # J3223024
    used on 232, 258 1974 and up
     
    jpflat2a, Oct 4, 2005
    #3
  4. Oct 5, 2005
    MA74CJ5

    MA74CJ5 Member

    Bolton, MA
    Joined:
    Oct 28, 2004
    Messages:
    482
    Thanks guys. Where did you get that diagram?
     
    MA74CJ5, Oct 5, 2005
    #4
New Posts