1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Master cyclinder ID

Discussion in 'Early CJ5 and CJ6 Tech' started by tgregg, Sep 28, 2005.

  1. Sep 28, 2005
    tgregg

    tgregg Member

    Oak Hills, CA...
    Joined:
    Apr 14, 2005
    Messages:
    529
    I have a 69 CJ5. If I am right it should have 9 inch brakes and a master cylinder with one compartment.
    I have 10 inch brakes and a two compartment master cylinder.
    I tried to take a picture of the master cylinder but the access hole is small and there just isn't enough room to get a clear picture.
    I want to put discs on the front but I need to identify my master cylinder and determine it's compatability for discs.
    Anyone got any good feedback?
     
    tgregg, Sep 28, 2005
    #1
  2. Sep 28, 2005
    Desert69Cj

    Desert69Cj New Member

    Joined:
    Sep 24, 2005
    Messages:
    4
    I also have a 69 and as a matter of fact I just rebuilt my master cyl. last week for about the forth time in the past 25 yrs. I originaly had 10in. factory brakes and did a 11in. conversion about 6 yrs. ago. The master cyl. should be a double resovour as mine is.
     
    Desert69Cj, Sep 28, 2005
    #2
  3. Sep 28, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    What DesertCJ said. :D
     
    sparky, Sep 28, 2005
    #3
New Posts