1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

id please

Discussion in 'Early CJ5 and CJ6 Tech' started by 4wheelmomma, Jul 17, 2005.

  1. Jul 17, 2005
    4wheelmomma

    4wheelmomma New Member

    Joined:
    Jul 17, 2005
    Messages:
    2
    my husband and i just acuired an early model jeep, has 4 cyl. eng., t-90 trans., rounded fenders(like cj5), l-head 134. was trying to id axles, has numbers 17038 and letter A stamped in it. been looking at web sites, cover looks to be front dana 25/27 could be 44. was wondering if anyone knows a cross for that number, think year model is between 55-59???? we will be selling eng. runs good may need carb. work, will be swapping for buick v6, will trade or sell at good price. any advice on swap would be greatly appericated. :AMC:
     
    4wheelmomma, Jul 17, 2005
    #1
  2. Jul 17, 2005
    Kodiak12060

    Kodiak12060 Sponsor

    Beacon NY
    Joined:
    Sep 27, 2002
    Messages:
    465
    Location?
     
    Kodiak12060, Jul 17, 2005
    #2
  3. Jul 17, 2005
    4wheelmomma

    4wheelmomma New Member

    Joined:
    Jul 17, 2005
    Messages:
    2
    live in N.GA
     
    4wheelmomma, Jul 17, 2005
    #3
  4. Jul 17, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,378
    Well, if it has rounded fenders it must be a CJ5. Any pictures? That would help us id the Jeep. Front axle should be a 25, rear would be a 44. The number 25 should be cast on the top portion of the pumpkin, 44 should be on the lower portion somewhere, offhand I can't think of exactly where to look.
     
    Glenn, Jul 17, 2005
    #4
  5. Jul 17, 2005
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    If the engine is truly a Jeep I -134 engine I'll buy the engine from you over the phone.

    Can you send me a private message or e-mail with a picture of the valve rocker arms with the valve cover removed?

    I'm coming through Georgia in the next two - three weeks.

    I would love to slide that engine in one of my jeeps.

    thanks

    kamel
     
    kamel, Jul 17, 2005
    #5
  6. Jul 17, 2005
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    If you are wanting to know what year jeep it is, post the serial number and we can tell you

    It should begin with one of the following
    57548
    8305
    8322

    With an I-134 it probably is 57548, but may begin with something else

    kamel
     
    kamel, Jul 17, 2005
    #6
New Posts