1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hydraulic clutch with a "through the floor" pedal?

Discussion in 'Early CJ5 and CJ6 Tech' started by M38a1diesel, Jul 16, 2005.

  1. Jul 16, 2005
    M38a1diesel

    M38a1diesel Member

    Wake Forest, NC
    Joined:
    Jun 4, 2005
    Messages:
    254
    I've seen it done on an M37, was just wondering if it could be done on one of these. I know the clutch and bellhousing I plan on using was originally hydraulic (external slave cylinder), but I want the interior and exterior to remain as stock-appearing as possible.

    Any recommendations for a master cylinder or perhaps pics and/or a link to a writeup?

    Thanks,
    Don
     
    M38a1diesel, Jul 16, 2005
    #1
  2. Jul 16, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    Someone a while back mounted their resevoir to the frame and used floor mounted pedals, looked pretty good. Might try a search for it.
     
    jd7, Jul 16, 2005
    #2
New Posts