1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

powersteering conversion

Discussion in 'Builds and Fabricators Forum' started by timber2_us, Jul 7, 2005.

  1. Jul 7, 2005
    timber2_us

    timber2_us New Member

    Joined:
    Jul 7, 2005
    Messages:
    1
    Hello All;
    Trying to find so info on converting my 56 willys wagon to power steering. Have been looking for a while now on many sites. Can anyone give me any info in doing this/
    Thank;s timber2_us@msn.com
     
    timber2_us, Jul 7, 2005
    #1
  2. Jul 8, 2005
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,539
    If you still have the SuperHurricane engine your going to have to fabricate the bracket for the power steering pump. Finding a double pulley for the crank may be tough also. You can fabricate tierod and draglink using DOM tubing and threaded inserts
    ( http://www.poisonspyder.com/ ) Of course if you have a 283 or 350 in it you can go with all chevy parts except for the tierods and draglink. I used to own a 54 Wagon. Should have never sold it. Good Luck!
     
    Posimoto, Jul 8, 2005
    #2
New Posts