1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Steering wheel ID

Discussion in 'Early CJ5 and CJ6 Tech' started by Bruce Hamilton, Jun 23, 2005.

  1. Jun 23, 2005
    Bruce Hamilton

    Bruce Hamilton oldjeeps

    West Newbury, MA
    Joined:
    Feb 8, 2003
    Messages:
    204
    The direction signal switch in my steering column is dead. Can anyone identify what year jeep it is from so I can get the correct replacement?
    picture attached.
    Thanks
     
  2. Jun 23, 2005
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    That's a GM steering column that Jeep used in XJs and YJs. Maybe CJs?

    I had the same one in my 92 S10.
     
  3. Jun 23, 2005
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    I don't believe I have ever seen wood used on the lower w/s frame...does that just cover the sheetmetal?
     
  4. Jun 23, 2005
    Bruce Hamilton

    Bruce Hamilton oldjeeps

    West Newbury, MA
    Joined:
    Feb 8, 2003
    Messages:
    204
    The entire dash is solid birch with a ployester finish. This was the work of the PO. Unfortunately he did not fully understand the stresses that a wooden dash would be subject to especially one in a fiber glass tub and used for plowing. He should have used a birch plywood because his dash is literally coming apart at the seams. He put a lot of time into this jeep and regardless of its problems it does work and look neat.
     
  5. Jun 23, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    XJ and MJ
    GM column
    garnet in color
    my guess 84 85 86
     
  6. Jun 24, 2005
    Bruce Hamilton

    Bruce Hamilton oldjeeps

    West Newbury, MA
    Joined:
    Feb 8, 2003
    Messages:
    204
    Thanks for you help!
     
New Posts