WTB L134 - Usable

I just bought a CJ2A. The motor is toast. I am looking for a runner or rebuildable engine. This has been sitting outside so any of the more external parts would be welcome too. They basically took all the removable parts (sir cleaner, oil canister, dip stick, carb, fuel pump, etc) and put them in the back so they could get rained on for 12 years. Thanks

 

I have two rebuildable blocks which I had taken to a machine shop to prep for builds but they only got to the point where the blocks went through the washer and were checked for cracks, and inspected. Then the machine shop owner died so never got anything else done. One was standard bore but will need to be bore .040 over, and needs to be hot tanked and tumbled. The other was cleaner, had already been bored .040 over machine shop said bores were within spec and it would just need honed, this one has Heli-Coil repairs in some of the head stud holes. I am not a big fan of Heli-Coil for this, but there are better solutions.

I also have a complete engine with the common crack below the distributor, I haven't torn it down but it was running when I parted the Jeep out 5 or 6 years ago. Might have usable internals.

I have good engines for the remaining projects I will finish, so won't be building any more engines. I'll let it all go cheap. We are less than 300 miles apart, so not too far for a road trip.

 

PM sent