Three Point Hitch?

1
It's sort of complicated because it weighs less than a 30hp tractor and the 4k rpm puts it at 75 hp but the bar spacing is 1 and you only have the gusto for 5' brush hog or 6' blade. But the 4wd helps the drawbar pull. I don't know why the stationary pto hp is soo low but there isn't much different between a pto on a feed elevator and a d20 going down the interstate.

You won't ever lift like a class 2 or 3 without the D70 axle and springs. Do consider a front weight.

 

As stated a cat 1 - I just posted an article by Clint Dixon on plowing with the Jeep -
https://www.farmjeep.com/farm-jeep-...dy-of-the-plowmans-theory-practice-technique/

It contains some the ASAE 3-pt standards if you want to get technical.

Barry

 

I'ld be looking for a motorized pull-behind rental.