Hood Reflector Mounts

3d printed hood reflector mounts for 1969 model year jeeps

I drew these up and printed them out.
Im using PETG filament which is supposed to be UV stable. I have spray painted one after sanding the surface and it came out good. You can leave as is or paint.

I've gotten 4 more pairs of reflectors now.
I'd use the flat rate small boxes but they bulge out a little once in the box. Don't want to risk them breaking.

Pair of reflector mounts ---- $15

Pair of amber reflectors------$10

Pair of flat reflector mounts--$5

USPS shipping-----------------$7


I can do paypal or venmo.
















I have one pair that didn't print cleanly. You can see the lines on the end of the right mount in the pic below. Sand it out or just use it as it. $5 plus the shipping.



New flat mounts

These are 3/8" thick, I'm working on a 1/4" thick version as well.

And I can print these out with or without the lip. In the above picture you can see my reflectors have a foam tape on the back that shows on the no lip option. The lip covers that up.

 

Updated shipping cost. Can do way better than med flat rate

 

I've got 4 more pairs of reflectors on hand and printing up a few more pairs of mounts this weekend

 

Had a request for a thinner flat mounts. I have 3/8" ready to print and will have 1/4" also this week.

Added to the original 1st post