1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T-14 Input Shaft Replacement

Discussion in 'Early CJ5 and CJ6 Tech' started by 70CJ5, Jun 6, 2005.

  1. Jun 6, 2005
    70CJ5

    70CJ5 Member

    Pleasant Hill, Ohio
    Joined:
    Dec 11, 2004
    Messages:
    114
    The front bearing in the tranny looks like it was slipping on the input shaft. The book said it has to be pressed off but I was able to take it off by hand. Do I need to replace the input shaft during my rebuild? It has some slight discoloration (inside the bearing too) like it got hot.
     
    70CJ5, Jun 6, 2005
    #1
  2. Jun 6, 2005
    BDL67

    BDL67 Brad79

    Jackman Maine
    Joined:
    Nov 25, 2004
    Messages:
    68
    ask nickmil
     
    BDL67, Jun 6, 2005
    #2
  3. Jun 6, 2005
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    Or it might be worth a call to Herm. I am not familiar enough with the T-14 to answer that.
     
    Warloch, Jun 6, 2005
    #3
  4. Jun 6, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    yep
    bearing is supposed to be pressed on
    if a new bearing slips right on, shaft is toast
     
    jpflat2a, Jun 6, 2005
    #4
  5. Jun 7, 2005
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,159
    yup.. toast. Damn I bet I have one too but I am a loooong way from home right now..

    BUBBA
     
    Jeepenstein, Jun 7, 2005
    #5
  6. Jun 7, 2005
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Yup, what he said! :cry:
    Nickmil.
     
    nickmil, Jun 7, 2005
    #6
New Posts