Turbo 400 Mount

I’m converting my 73 commando from a t14 to a turbo 400. I have everything except the transmission mount. Where can a find such a unit?

 

Transmission Mount, Automatic, 1967-1986, Jeepster Commando, Commando, – The JeepsterMan

 

I have that and it doesn't like up with the holes in the cross member or the holes in the transfer case adapter.

 

Depending on which adapter you are using Novak has one but the cross member may need drilled along with relocation.
https://www.novak-adapt.com/catalog/adapters/transmission-to-transfer-case/th400-to/kit-124/

 

FWIW, that Novak adapter is the same part (RMU) that I used for my CJ5 T-18 conversion. It fit fine.
Adapting the Borg Warner T18 & T19 Transmissions to the Dana Spicer Models 18 & 20 Transfer Cases (novak-adapt.com)

 

It is a factory adapter from my parts commando. Everything was there except the transmission mount.

 

Looks like you may have to custom fab something to work with that or find a NOS part.

 

I don't think the mount bolts up directly under the adapter. I seem to recall it's offset.
Which would mean you need a heavy metal plate or 3 sided piece of channel that bolts to the adapter to assist in the offset mounting of the rubber mount.
Look for photos of full size Jeeps with T400; that might help visualize what I'm trying to explain.

 

That sounds like what I removed from my stock T14 mount in the CJ5.

 

See if this helps.
Yes several Jeep transmission mounts were this way.

Mounting TH400 & Quadra trac 1976 Jeep CJ7 - YouTube

 

Awesome! Looks like I can modify the T14 mount.

 

I used the Novak adaptor and the mount they sell. I did have to elonggate a hole and drilled a new one.