1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

For Sale V6 Engine+t90+extras

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by mtjeepcj5, Aug 22, 2023.

  1. Aug 22, 2023

    mtjeepcj5 New Member

    Cincinnati OH
    Apr 3, 2012
    IMG_0002.jpeg IMG_0003.jpeg IMG_0006.jpeg

    For sale is a V6 engine, 3spd transmission, and other parts that came out of a running and driving 59cj5. The jeep is being put back to a 4cyl and these are the parts that are no longer needed.

    Engine: I believe it’s a 225. That is based on the shape of the valve covers and the fact it’s an odd fire. Unknown mileage but it ran strong.

    Transmission: just a run of the mill t90. No issues with it. Still bolted to the engine.

    Engine mounts and crossmember: the mounts are a little rough on the edges where that were torched from the frame. A little grinding and I think they’ll clean up fine. The crossmember is unique to the v6 setup, I think, because it didn’t work with the 4cyl that got put back in. The transmission was too far to the right with this one.

    Radiator and shroud: Modime radiator in excellent condition with a plastic shroud. Appears to be factory.

    Drive shafts: Both front and rear. One was a little too long, the other a little to short for the new setup.

    Cable clutch setup: The cable of course and two brackets. One bolts to transfer case the other either bolts or welds to frame.

    Draglink: Shorter than the 4cyl one. I think so you can Re-clock the pitman arm to get full travel both ways without hitting something.

    Throttle pedal and bracket: The bracket bolts to upper floor cover. The pedal is homemade and welded on. Not great looking but it worked.

    Firewall mounted battery tray.

    Exhaust system: Fully welded together. Be advised it does go under the transmission crossmember because this jeep has a pto winch.

    This is located in Cincinnati Ohio. Shipping is not a viable option. I do have an engine hoist so I can load for you.

    Thanks for looking.
  2. Aug 22, 2023

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Rochester, NY
    Nov 5, 2009
    I think we can work something out.
  3. Aug 23, 2023

    CJ51973 Member

    Versailles, KY
    Nov 6, 2009
    I see the bellhousing I need. You are close enough to come get it. Let me know if you end up breaking this up.
New Posts