Fused Terminal Strips

12". Yeah I know. Baby snow for you but record snow for me. I haven't seen more than a few inches of white death since the seventies.

 

That's impressive. Been a while since that happened.

 

I used the Eaton stuff that was posted. I like it. The only problem is that you need to buy all the little plugs, connects, ends and special crimpers. Waytek makes it easy as they have links to each product to what needs to go with it.
But it's water proof, very well built.
I searched for some time but nothing compares to the Eaton stuff

 

I opted to go for a Painless fuse block (PN 30001) to consolidate the 3 fuse blocks and multitude of fusible links (3 at the battery and 6 under the dash) I have into a single location. It also includes the flashers and a horn relay.

I of course went over the top and put together my own wiring diagram from scratch since it has never matched any available wiring diagram. I decided to do my own diagram because every time I need to do something with the wiring I spend an hour just trying to figure out what wires are doing what. I don’t dive in deep enough to ever get them into long term memory apparently.

I’m also adding diodes at the same time for flat towing the Jeep. I have them installed temporarily but they’ll now have a permanent location.

I can’t truly give positive or negative feedback at this point since I just got the unit mounted and ordered all my parts but I’ll post some updates.