1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Here We Go Again…..

Discussion in 'Early CJ5 and CJ6 Tech' started by mickeykelley, Apr 8, 2022.

  1. Apr 8, 2022

    mickeykelley Well-Known Member

    Republic of Texas
    Oct 10, 2015
    Will be installing the replacement rod in the carb for altitude, 1.5 leaner custom made by The Carburetor Shop, next time I get to the cabin. Gonna start with a fresh set of plugs so I can check things with the change. So now to remember the issues. I have to Pertronics and remember I had to go back to normal plug cables. So do I get resistor plugs or not? Don’t remember now. What are the thoughts today with regard to brand? AutoLite I believe was the original. Thoughts?
  2. Apr 8, 2022

    timgr We stand on the shoulders of giants. 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Medford Mass USA
    Aug 10, 2003
    "Regular plug wires" being resistor wires? Most are. Anything but resistor wires will make terrible radio noise. I would go resistor plugs too - they are pretty much used on everything except maybe lawnmowers. IMO use whatever is available that's a match. Lots of good brands. I would go Champion because the plating is good and the black plugs rust.
New Posts