1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need A Fuel Line Pic F-head

Discussion in 'Early CJ5 and CJ6 Tech' started by SIDSCJ, Feb 21, 2022.

  1. Feb 21, 2022
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    Going back to a Carter YF after having a Solex for too long.
    Original fuel lines are long gone so I'm starting from scratch.
    Can I get a good pic of the routing of the original line from the pump up to the carb>
    Have new tubing so I'm going to roll my own.
    TIA.
     
  2. Feb 22, 2022
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    677
    If nobody posts something by Thursday I can shoot some photos of a '62 with the double action pump
     
  3. Feb 22, 2022
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    If you can, that's fine.
    If not, I think I got what I need on the 3Bpage.
     
  4. Mar 5, 2022
    Eric

    Eric Member

    CA
    Joined:
    Apr 13, 2006
    Messages:
    129
    Good morning.

    Any chance you can post a link to that page? I have same question.

    Thanks,

    Eric
     
  5. Mar 5, 2022
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    Eric likes this.
  6. Mar 12, 2022
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,737
    If you have the fuel pump with the glass bowl you can turn the top around and index it with the inlet in the rear and the outlet in the front, that makes it a lot easier to make the fuel lines. I used a brake line from the auto parts store to make my fuel line, it is easy to work with you can run it over the timing cover and around the dipstick pipe and up to the carb then cut it to length and flair it to fit to the carb. You don't need to double flair it the fuel pump is low pressure. Good Luck.
     
New Posts