What mates to a F4 drivetrain?

I really want to run the 63' to its origins, it has the old school F4/BW98?/and the dana 18? tcase. What dilema I have is I want to run 35's on a springover, some light duty wheeling while in the long run getting it as factory as possible. Is there an easy v6 swap that will mate to the trannie? While still keeping it in era and limiting the amount of wiring and other crap Ill need to run to make it run....?

Edit: The reason I want to keep the rest of the drivetrain and axles is with the axles in it I beleive there 5.13 gears or higher (not confirmed but rough using chaulk and the tire/drivline rotations)

 

Fix me if Im wrong, ot has stamped on the d side of the casing T98-1Z

 

Then I will take all the sarcasm as Keep it as it is and the 80$ I soent on rebuild kits was a good investment.....

 

they are just jealous !
very capable as it sits
tires and a little lift
away you go as is

 

So I shouldnt tell you what I paid for it then huh?

LOL

I got it off our local web board complete bumper to bumper, clean title and vin plate, a second tub from a 65, a few misc parts still needed, for 50$.

 

Im not doing much extreme to it, a buddy has a set of YJ springs he gave me, Im going to springover the axles, flip insert/high steer the front and away I go.

 

if it were me I would probably borrow some 33s and give it a little lift, 2.5" or so
then go play with it and see how she does
you would be very surprised what it will do
but, that's my opinion !

 

Eye Candy

 

Eye Candy