1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless V6 Flex Plate

Discussion in 'Early CJ5 and CJ6 Tech' started by jpsage, May 7, 2005.

  1. jpsage

    jpsage New Member

    I need a part number for a 1970 V6/TH400 in a 1970 Jeepster. Should be the same as a CJ5 with same engine/transmission.

    Thanks,
    John
     
    jpsage, May 7, 2005
    #1
  2. Boyink

    Boyink Super Moderator Staff Member

    Hi John...

    Not sure on the #, but you're after a Jeepster-specific item there as the CJ5 never came with the TH400. Not enough wheelbase....
     
    Boyink, May 7, 2005
    #2
  3. jpsage

    jpsage New Member

    Sorry for the mis-info. I found a Balkamp no (6005005 via NAPA) for a 1975 Buick through NAPA but am not sure. Should be the same as long as they are both odd-fire????
     
    jpsage, May 7, 2005
    #3
  4. sparky

    sparky Sandgroper Staff Member Founder

    Should be
     
    sparky, May 7, 2005
    #4
  5. jpsage

    jpsage New Member

    Napa sez they have to go to Denver and it will be 5-7 days and I will have to pay $75.00 plus freight. Since it is that long I am going to wait until Monday when the first string gets in.

    Silly question, if hot rod shops make custom ones, can they repair/rebuild mine???
     
    jpsage, May 7, 2005
    #5
  6. sparky

    sparky Sandgroper Staff Member Founder

    What's wrong with it?

    You can have a 231 EF balanced to your crankshaft (if it's not in the block I think).
     
    sparky, May 7, 2005
    #6
  7. jpsage

    jpsage New Member

    Its cracked and makes it sound like some one with a hammer banging on the tranny.
     
    jpsage, May 7, 2005
    #7
  8. jpsage

    jpsage New Member

    Thanks! Daaah... You have to do the crank and flex together and that would mean doing the engine..... Sorry my mouth was way ahead of my brain. AGAIN.... Car-parts.com has nothing nor do any of the other autoparts here.
     
    jpsage, May 7, 2005
    #8
  9. sparky

    sparky Sandgroper Staff Member Founder

    I've never done it hence the disclaimer. I just have read it can be done. ;)
     
    sparky, May 7, 2005
    #9