Fan Shroud Options

I'm not sure if my 1970 with V6 is supposed to have a factory fan shroud, but I'd like to ad one. I did find a fiberglass one at the jeepsterman site, but not sure how that one attaches. Any ideas ? Thanks!

 

I put one of those on my '69 last year along with a Champion radiator. It seems like a good part. You can see the posting here (and there are a few more higher up the thread):

• What Did You Do To Your Jeep Today?

 

I installed one of his shrouds. Minor fitting was needed on mine to clearance the alternator pulley. Very happy with it.

 

I made my own out of sheet metal (used cardboard for a mock up)
Works great and it was free!

 

I did the same. The engine never heated up prior to installing it, but I felt the need to install one anyway.
I ran a tin sheet around the radiator perimeter that was wide enough to put the blades inside it. I could feel the difference from the front of the grill.

 

Jp magizine has a good article on making one with an old t shirt and fiberglass. I made one it works fine Cost about twenty bucks and an afternoon.

 

I used this one on my 1969 Jeepster Commando with the Dauntless V6. Fit fine and seems to do the job. It attaches with 6 screws, 3 on each side.

Fan shroud, for 22" radiator