1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transmission Tunnel Picture

Discussion in 'Early CJ5 and CJ6 Tech' started by Jp274, Jul 13, 2020.

  1. Jul 13, 2020
    Jp274

    Jp274 Member

    Hewitt, NJ
    Joined:
    Jun 17, 2016
    Messages:
    84
    Does anyone have a picture of the transmission tunnel cover where the steering wheel tube comes through. I have a Ross steering setup and a f134 motor with a t90 trans. 1969 cj5

    thanks for the help
     
  2. Jul 13, 2020
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    I’ve got all the floor parts off the Jeep and in a bin, would pics of the parts help?
     
  3. Jul 13, 2020
    Jp274

    Jp274 Member

    Hewitt, NJ
    Joined:
    Jun 17, 2016
    Messages:
    84
    Sure I just need to see how the steering column comes through the floor
     
  4. Jul 13, 2020
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    There’s a rubber collar that slides around the bottom
    of the column which goes through the semicircular portion of this panel shown just below it in this pic. The arched cutout below that in the panel is over the brake master cylinder. The complete hole shown is for the brake pedal arm.
    26963387-82A1-4BDC-933E-623E36A1AA15.jpeg
     
  5. Jul 13, 2020
    Jp274

    Jp274 Member

    Hewitt, NJ
    Joined:
    Jun 17, 2016
    Messages:
    84
    Was there another piece that also went around the steering column on top?
     
  6. Jul 14, 2020
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,421
  7. Jul 14, 2020
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,192
    Yes, there is an upper closing panel that bolts on above the column.
    -Donny
     
  8. Jul 14, 2020
    Jp274

    Jp274 Member

    Hewitt, NJ
    Joined:
    Jun 17, 2016
    Messages:
    84
    Thanks everyone for the help
     
  9. Jul 14, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,721
    Here's another picture from mine (with the master [​IMG] cylinder access open because I'm working on the brakes):
     
  10. Jul 14, 2020
    Jp274

    Jp274 Member

    Hewitt, NJ
    Joined:
    Jun 17, 2016
    Messages:
    84
    Perfect just what I needed to see thanks again
     
New Posts