1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Distributor Clamp Hold Down

Discussion in 'Early CJ5 and CJ6 Tech' started by vanguard, Apr 15, 2005.

  1. vanguard

    vanguard

    I need a picture of the distributor hold down clamp for a 225 with a Delco distributor. Any help would be appreciated.

    A picture of the hold-down clamp for a 225 with a Prestolite might also be helpful.

    Thanks, Joel
     
    vanguard, Apr 15, 2005
    #1
  2. gte636p

    gte636p Member

    i just used two fender washers with a little bit of the side cut off... no digi though.
     
    gte636p, Apr 15, 2005
    #2
  3. jpflat2a

    jpflat2a what's that noise?

    I thought they were the same :?
    the prestolite hold down on mine looks like a minature rocker arm turned upside down, stamped steel
     
    jpflat2a, Apr 15, 2005
    #3
  4. $ sink

    $ sink Gazillians of posts

    Prestolite clamp in it's natural habitat
     
    $ sink, Apr 15, 2005
    #4
  5. yellowwillys

    yellowwillys New Member

    Joel, the hold down on my my Delco looked the same as the Prestolite if that helps. bill
     
    yellowwillys, Apr 16, 2005
    #5
  6. vanguard

    vanguard

    It does thanks!
     
    vanguard, Apr 16, 2005
    #6
  7. Hippo393

    Hippo393 Jeepless

    Joel, last year I had pics of the diffo clamp types, but I can't find it right now. Delco clamp is much diffo than Presto. One will work with the other, but not vice-versa IIRC.

    Are you in need of a Delco clamp?
     
    Hippo393, Apr 17, 2005
    #7