1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pressure plate bolts!

Discussion in 'Early CJ5 and CJ6 Tech' started by Mcruff, Apr 11, 2005.

  1. Apr 11, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Can anybody tell me what the pressure plate bolts are supposed to be torqued to on the v6, my Haynes, my 2 Chiltons and the jeep Bible never mention these bolts. I have them torqued to 32 lb ft right now which is whats recommended for 3/8 coarse thread bolts, but I would like to make sure as these are specialty fasteners and the standard value usually never applies!
     
    Mcruff, Apr 11, 2005
    #1
  2. Apr 11, 2005
    Jeepsterman

    Jeepsterman I had a beer with Panzer.

    Southgate, MI
    Joined:
    Sep 23, 2002
    Messages:
    90
    If no one speaks I can check when I get home in about an hour Mike.
     
    Jeepsterman, Apr 11, 2005
    #2
  3. Apr 11, 2005
    ljspop

    ljspop Lurking Bronco Dude

    San Diego, CA
    Joined:
    Jan 29, 2003
    Messages:
    394
    ljspop, Apr 11, 2005
    #3
New Posts