1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

D30 Discs

Discussion in 'Early CJ5 and CJ6 Tech' started by Posimoto, Apr 3, 2005.

  1. Apr 3, 2005
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,539
    When installing the caliper bracket is it clocked so the caliper is at 11 or 1 ? ie before or after TDC
     
    Posimoto, Apr 3, 2005
    #1
  2. Apr 3, 2005
    Ghetto Fab.

    Ghetto Fab. Member

    Atascadero, Ca.
    Joined:
    Jan 13, 2005
    Messages:
    512
    Wouldn't that depend on what side of the vehicle your looking at?

    Calipers are usually towards the rear of the axle and up.

    Hope that helps,
    Kevo
     
    Ghetto Fab., Apr 3, 2005
    #2
  3. Apr 3, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    w3srl, Apr 3, 2005
    #3
  4. Apr 3, 2005
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    It should only fit one way otherwise the bleeder screw would not be facing up.
     
    Project71-5, Apr 3, 2005
    #4
  5. Apr 4, 2005
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,539
    Thanks guys.
     
    Posimoto, Apr 4, 2005
    #5
  6. Apr 4, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Unless you mount the calipers on the wrong side of the Jeep. Be a nice guy and don't ask how I learned this.... :rofl:
     
    w3srl, Apr 4, 2005
    #6
New Posts