1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

throw out bearing

Discussion in 'Early CJ5 and CJ6 Tech' started by Mudweiserjeep, Mar 31, 2005.

  1. Mar 31, 2005
    Mudweiserjeep

    Mudweiserjeep JEEP: Bouncy and Fun

    tipp city, ohio
    Joined:
    Jun 17, 2004
    Messages:
    718
    How do you replace a throw out bearing? Is it pressed on? What tools do I need?

    V6 to t-14a
     
    Mudweiserjeep, Mar 31, 2005
    #1
  2. Mar 31, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,385
    Unless you specify just the bearing, it will probably come as an assembly, already on it's carrier. Just the bearing itself would have to be pressed on to the carrier.
     
    Glenn, Mar 31, 2005
    #2
  3. Mar 31, 2005
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Should be pressed on. I've gotten an exact replacement from Advanced Auto Parts. The part number on mine was 1625 IIRC. :beer:
     
    Hippo393, Mar 31, 2005
    #3
  4. Apr 2, 2005
    67cj5

    67cj5 Member

    Oregon
    Joined:
    Oct 15, 2004
    Messages:
    347
    they come as an assembly you just slip on. I cant ever remember anyone getting just the bearing part. It may be possible, Just dont know anyone that has wanted to try to replace just the bearing.
     
    67cj5, Apr 2, 2005
    #4
  5. Apr 2, 2005
    61CJ5

    61CJ5 Member

    Lafayette, CA
    Joined:
    Feb 9, 2003
    Messages:
    188
    When I bought one, it came as just the bearing. The press fit wasn't very tight though, I swapped the bearings out with a vice, a large socket, and a hammer very easily.
     
    61CJ5, Apr 2, 2005
    #5
New Posts