1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cj5 Koenig Hardtop Mounting Hardware.

Discussion in 'Early CJ5 and CJ6 Tech' started by 1957Willys, Aug 6, 2018.

  1. Aug 6, 2018
    1957Willys

    1957Willys Member

    Birmingham, Alabama
    Joined:
    Mar 23, 2012
    Messages:
    698
    What are some of you mounting Koenig hardtops with? I tried 1/4 bolts but the nut goes up into the channel and it's hard to install and remove. Doesn't M38A1 arctic tops use J bolts to hold the top down?
     
    1957Willys, Aug 6, 2018
    #1
  2. Aug 6, 2018
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,421
    I have a meyers top
    and use 12-24 machine screws . with a nut on bottom
    made a special socket tool for nuts . seeing they have to go up in channel behind angle iron for roll bar
    hard top socket.jpg
     
    Twin2, Aug 6, 2018
    #2
    Focker likes this.
New Posts