1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Kelly Locking Hubs

Discussion in 'Early CJ5 and CJ6 Tech' started by Ducks-Bass-n-Jeeps, Mar 27, 2005.

  1. Mar 27, 2005
    Ducks-Bass-n-Jeeps

    Ducks-Bass-n-Jeeps A Parade of One

    Brentwood, Tennessee
    Joined:
    Aug 11, 2003
    Messages:
    120
    In my garage cleaning fest yesterday I uncovered my jeeps original locking hubs. The oil / grease is set up like asphalt, but I am going to clean them up. In looking at them yesterday I noticed they used ball bearings to engage the axle.
    Does anyone have any experience with these? Are the pretty reliable? I am considering putting them back on in place.
     
    Ducks-Bass-n-Jeeps, Mar 27, 2005
    #1
  2. Mar 27, 2005
    Ducks-Bass-n-Jeeps

    Ducks-Bass-n-Jeeps A Parade of One

    Brentwood, Tennessee
    Joined:
    Aug 11, 2003
    Messages:
    120
    I do not belive it! :shock:

    I have asked a technical question and no one has an opinion. :rofl:
     
    Ducks-Bass-n-Jeeps, Mar 27, 2005
    #2
  3. Mar 27, 2005
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    I have a set of Kellys in my spares box, have never used them but they are built very well.



    does that help?? :D
     
    $ sink, Mar 27, 2005
    #3
  4. Mar 27, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,378
    I don't know anything about the Kellys, but what hubs are on the Jeep now?
     
    Glenn, Mar 27, 2005
    #4
  5. Mar 27, 2005
    Ducks-Bass-n-Jeeps

    Ducks-Bass-n-Jeeps A Parade of One

    Brentwood, Tennessee
    Joined:
    Aug 11, 2003
    Messages:
    120
    I put on a set of Superwinch hubs. I understand that they are prone to letting water in. I am wondering if the Kellys are as durable or maybe even more durable as well less prone to leaking.
     
    Ducks-Bass-n-Jeeps, Mar 27, 2005
    #5
  6. Mar 28, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,378
    I've had 2 sets of Superwinch hubs on full size trucks and they both broke. As I remember part of the locking mechanism was a thin ring that didn't last. Maybe they make them better now, I don't know. I'm sure other people have used them with no problem, that's just my experience. ;)
     
    Glenn, Mar 28, 2005
    #6
  7. Mar 28, 2005
    Steffy

    Steffy New Member

    Pittsburgh, PA
    Joined:
    Jan 30, 2003
    Messages:
    38
    Im planning on running the kelly hubs on my -3b, but havent got to try them yet. I have already torn mine apart and cleaned them up though, and by the looks of it they are very well built.
     
    Steffy, Mar 28, 2005
    #7
New Posts