1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

My New To Me South Bend

Discussion in 'The Tool Shed' started by Focker, Oct 30, 2017.

  1. Nov 17, 2017
    tomtom

    tomtom Sponsor

    Huntington Beach, CA
    Joined:
    Jun 20, 2007
    Messages:
    150

    www.hobby-machinist.com is my favorite machining forum.
     
  2. Nov 24, 2017
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    You finished cleaning the lathe right?

    The guys who didnt get a free lathe want pictures of stuff you make when you learn.
     
    Danefraz likes this.
  3. Nov 24, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    No :oops:
     
    piffey263 likes this.
  4. Nov 26, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,353
    Focker, here is a nice modification that will improve the ease of use. I made this and 1 other, waiting to have a friend of mine after Christmas engrave the numbers on them. I stamped the last set but wanted these to look a little nicer. The factory size on both of my lathe's were 1" diameter dials, the option about 6 years later was to have them 1 3/4" diameter. I like them much better so I made a set since buying these would have set me back several hundred dollars.

    Compound large dial.JPG
     
    Danefraz likes this.
  5. Nov 26, 2017
    Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Bainbridge...
    Joined:
    Sep 21, 2009
    Messages:
    204,370
    Now that is nice...
     
  6. Nov 26, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Hey! He was talking to me.


    That's nice Mike!
     
  7. Nov 27, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Here's some progress.

    [​IMG]
     
    tarry99, piffey263 and ITLKSEZ like this.
  8. Nov 27, 2017
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,807
    I cannot believe you made a whole jeep out of that lathe!
     
  9. Dec 2, 2017
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,485
    Lol. You guys are killing me. I'de love to get my hands on a lathe like that
     
  10. Dec 2, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I think my first project might be a razor handle? A coworker has a little side business making shaving cream and brushes. It would be cool to see if any of her customers had an interest in one.
     
    givemethewillys likes this.
  11. Dec 4, 2017
    piffey263

    piffey263 Active Member

    Medford, OR
    Joined:
    Oct 16, 2008
    Messages:
    1,214
    spring loaded punch!

    brass razor handle would be cool, so is a flame licker engine :)

    Sooo many possibilities. I would start with basics and beginner lath projects.
     
  12. Dec 5, 2017
    toolman_ar

    toolman_ar New Member

    Joined:
    Oct 25, 2013
    Messages:
    29
    Focker,
    I will second tomtom, Hobby-Machinists.com.

    Greate place to learn about your lathe. Check out Mrpete222 on YouTube.

    You said you have it level. Set up the spindle bearings correctly. Lubricate with the proper oil, and start running the head stock and test the bearing temp. Then you need to align the head stock and tail stock.

    Start simple, face off a part, then turn a shaft to diameter. Then you can start cutting threads...

    Next thing you will be making a captive nut project.

    If properly lubricated, you won’t do any damage. Remember to oil every day before use.

    Look for an AXA tool post holder.

    You think Jeeps are addictive, old iron machine tools... Oh man, you are in trouble now.

    toolman_ar
     
    Danefraz and Focker like this.
  13. Dec 6, 2017
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Spend some time understanding proper tool grinding / sharpening for your projects......also suggested turning and feed speeds.........along with the need for cutting fluids on certain metals.

    [​IMG]
     
    Danefraz and Focker like this.
  14. Dec 6, 2017
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,807
    I really like carbide inserts for easy and speed, but grinding your own tool bits for specific applications is interesting and very useful.
     
  15. Dec 6, 2017
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Carbide is great on tough steel to hog out and convenient to change a cutting edge but when interrupting a cut it tends to chip...........also carbide normally likes to be run at higher feeds and speed.........HSS on the other hand will just about do it all at less cost , but may not stay sharp as long................and on different materials HSS will get you a better overall machined finish especially while making a finish cut.
     
    Danefraz likes this.
  16. Dec 6, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,353
    I typically use all types, HSS steel, carbide inserts and brazed carbide blanks. On tougher stuff like 4140, 4142 or tool steel I use carbide. I use HSS steel for parting off and for any form work and sometimes for a good finish on cold rolled or hot rolled steel. Hobby machinist is not a bad website but there are a lot of amateurs on there and they sometimes give out incorrect or partially correct info out of ignorance. My advice is to temper what they say with your own common sense. A very good worthwhile mod to your machine is to change the take up nut on the back of your spindle with the needle bearing upgrade, it smooths the spindle out, cuts down heat build up, takes out all backlash clearance and lasts forever. It only costs about $7 for parts plus shipping.

    405-27.jpg
     
    Last edited: Dec 6, 2017
    Focker likes this.
  17. Dec 6, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,353
    Heres you a good project to hone your skills. I made 8 of these about 5-6 years ago for stocking stuffers. They are called turners cube, a cube in a cube in a cube. Half the guys that make these make them wrong, a turners cube is suppose to be free tumbling unlike half of the ones on internet that are still all locked together. they were an old apprentice test years ago. The outside dimension is 1" square and then each cube is progressively smaller.

    Turnerscube11.jpg
     
    Danefraz, 47v6 and ITLKSEZ like this.
  18. Dec 6, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    :shock:

    Impressive. :clap:
     
  19. Dec 11, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Ready for some proper oil and then some chips.
    [​IMG]

    [​IMG]
     
    piffey263 and 47v6 like this.
  20. Dec 11, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,353
    Looks Good!!
    Please keep the grinding grit away from the lathe, it will eat those soft ways up. Maybe a piece of cardboard behind the grinder when you use it.
     
    Danefraz and 47v6 like this.
New Posts