Windshield Washer

What are you guys using for a windshield washer tank etc, I had one of the bags that was mounted on the fender and a pull know in the dash, it has since gone bad, holes leaking etc, im just curious what you guys ahve done to solve this issue

 

Welcome from a native UT Jeeper.

No help on the washer. Most early 5's didn't even come with that option. I'm sorta surprised your 69 did.

 

Still using mother nature to wash my windshield

 

Rubbermaid lemonade bottle and a remote 87 chevy blazer pump. With bent welding rod to hold it on the fender.

 

I actually have the entire setup from a later 70's model cj5, it fits fine on the inner fender just under the heater core. I don't have it on there now but I did test fit it and drill the holes in the fender for it to set. You can by the whole assembly pump and all from 4wd hardware for a decent price IIRC.

 

thanks Brad, yea mine has the single hole in the center of the tub not actually on the hood, and it has what looks like 2 screws with holes in them that you can adjust to spray each side of the window, th p/o said it is a renigade, and so far from what im reading here it is, has the boxed in frame, had the extra leafs, skid plate on oil pan etc, I will get some pics for you guys here soon or im shure to be shunned.....

 

I bought a tank/pump from 4WD hardware....just need to install it.

 

Was this not a common feature? I have the same washer on my 1970 cj-5 (bag on fender and pull knob.) I think the nozzle is stopped up on mine.

 

used a pump/bottle from 80's Dodge pickup. jets from 80's GM truck mouted on wiper.

 

If I'm not mistaken the older JEEPS did not have any provision for the 'squirt'. This would be something that came late 60's.