Intake manifold question

I did a search here for this info. Nothing found so I'll just ask.
I found an Offenhauser "C" series intake for a 231 on CL for $100. Can this be ran on the 225?

 

It might have provision for EGR valve. There are differences between the 225 and the 231.

 

You need to work on your Google-fu.

There are lots of posts about this the archive - https://www.google.com/search?q=sit...8#q=site:earlycj5.net+231+225+intake+manifold

 

C series manifolds are designed for mid to upper RPM.
http://www.exeterautosupply.com/Docs/Offenhauser catalog.pdf
they are for sale new
http://www.summitracing.com/search/...anifolds-carbureted/make/buick/engine-type/v6

 

Need to look very closely at all the water ports on the manifold if used. About half of the ones I find have cracked due to over tightening the temp sender. Buyer beware. FYI, I usually get 150 for a good manifold so 100 is a good deal if it checks out.

 

Yes........Yes I do. After seeing what you typed into the URL box, I promise to do a better job next time.
Thanks Tim.