1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What's the best parts house to get one of these?

Discussion in 'Intermediate CJ-5/6/7/8' started by gottolovem, Apr 23, 2015.

  1. Apr 23, 2015
    gottolovem

    gottolovem New Member

    Reno
    Joined:
    Apr 14, 2015
    Messages:
    28
    I figured out why the brake light's don't work:shock::shock:and of course no one local has any idea!
    Would Kaiser willys have them? Should I get a FSM from them while i'm at it?

    [​IMG]
     
    Last edited: Apr 23, 2015
    gottolovem, Apr 23, 2015
    #1
  2. Apr 23, 2015
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Apr 23, 2015
    #2
  3. Apr 23, 2015
    gottolovem

    gottolovem New Member

    Reno
    Joined:
    Apr 14, 2015
    Messages:
    28
    Kaiser is a bust perhaps i'll just use some regular wire ends, a little afraid i'll be revisiting this repair after a trip into the hill's
     
    gottolovem, Apr 23, 2015
    #3
  4. Apr 23, 2015
    gottolovem

    gottolovem New Member

    Reno
    Joined:
    Apr 14, 2015
    Messages:
    28

    Oops my bad would you believe me if I said that's my first mistake;);)
     
    gottolovem, Apr 23, 2015
    #4
  5. Apr 23, 2015
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,714
    I found the flat 2blade connector at Oriellys and Autozone - use it on my reverse light transmission switch as well as brake light switches. None of the stores had it in stock, but can order it in in a couple days. might try finding it by using back-up light switch

    Here is the orielly one: http://www.oreillyauto.com/site/c/de...ter&vi=1022218
     
    FinoCJ, Apr 23, 2015
    #5
  6. Apr 23, 2015
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    Check Cole Hersee as well, I believe they show a Victor part #.
     
    uncamonkey, Apr 23, 2015
    #6
  7. Apr 24, 2015
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,529
    Those are Delphi Packard 56 series connectors and I know you can get the brass terminals from O'Reilly's. The shell may be a little more difficult to find as it isn't a typical connector but a quick trip to the pick & pull would likely yield a life time supply. Waytek Wire has a lot of that series but suspect you would be buying a minimum of 10 if they do have that specific end.
     
    duffer, Apr 24, 2015
    #7
  8. Apr 24, 2015
    gottolovem

    gottolovem New Member

    Reno
    Joined:
    Apr 14, 2015
    Messages:
    28
    Sweeeeet thank's to all:D:D:D

    Next time i'll make sure to post in the proper sub forum!
     
    gottolovem, Apr 24, 2015
    #8
  9. Apr 24, 2015
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    Sorry, not a Victor, Packard 2962679. according to Cole Hersee.
     
    uncamonkey, Apr 24, 2015
    #9
New Posts