Skid Pan Differences

Good Day all!

is there a difference between the Dana 20 and the Dana 300 skid pans?

I am pretty confident that i have a T-150 with a Dana 20 TC, but i think my pan MAY be for a 300... the trans is a 3 speed, and the TC can be set up with twin sticks (i think) if that helps or isnt apparent thru the photos

here are some pics











will someone please tell me what i have for sure and if the pan that i have will work?

ANY help would be greatly appreciated

thanks! :easy rider:

mk

 

Yea looks like a D20. The pan looks like the one on my CJ. Not sure about the mount though; don't see why it wouldn't work. Novak sells a twin stick kit and a couple of other places sell some too. If you were up to it you could make your own.

 

The T-150 never came with the Dana 300. Only the Dana 20. That's a T-150 and a 20.

I don't know how to tell the D20 from the D300 skid plate ... but that looks like the right part to me. You'd need to mix in 1980 or later parts to get the D300 or anything associated with it.

I'm puzzled why you think it could be the wrong skid plate. Looks fine to me.

The single-stick shifter like that works fine. I'd keep it at this stage. Put the twin stick in the "future projects" category.

 

i bought the plate at a meet timgr, is why im confused... as for twin sticks, thats not on the plate for anything to do anytime soon...

thanks everyone for your help!

 

Well, the frame doesn't change, so it should bolt up there. If it was a little off, I'd try to make it work. I don't think there is any way to ID it if you don't have an example of each to compare with.

 

true about the frame... just wanted to know if i was looking at something that was going to have clearance problems or what-have-you...

thanks again... always nice to get advice from someone smarter than me