1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear ends

Discussion in 'Early CJ5 and CJ6 Tech' started by Twin2, Aug 20, 2014.

  1. Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    after reading the other tread about stripped hub . and it being a 71 jeep . shouldn't it come from factory with a flanged axle rear end . or is this one of those , we had to use up the inventory before the next model year . or did the PO swap it out and replace it with a 2 piece rear end . just curious . granted the model 44 was used for many years . off set and centered .
     
    Twin2, Aug 20, 2014
    #1
  2. oddfirejeeper

    oddfirejeeper Active Member

    should be a flanged axle in 71. they started using that mid 70
     
    oddfirejeeper, Aug 20, 2014
    #2
  3. rocmoc

    rocmoc Member

    YUP, my mid-year '70 has one!

    rocmoc n AZ/Mexico
     
    rocmoc, Aug 21, 2014
    #3