1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bolt Size/Pitch please

Discussion in 'Builds and Fabricators Forum' started by TexasBlues, Jun 22, 2014.

  1. Jun 22, 2014
    TexasBlues

    TexasBlues JEEP-Hockey-Holic

    Marietta, GA
    Joined:
    Jun 5, 2007
    Messages:
    529
    hey all...

    can someone please tell me what size the bolts are that go in here? this is a 1975 frame and PS steering box

    i tried my thread finder tool, but not sure i got it right as the 16 and the 1.5 are so similar...

    it SHOULD be standard, since its old AND American

    [​IMG]

    [​IMG]

    thanks!
     
    TexasBlues, Jun 22, 2014
    #1
  2. Jun 23, 2014
    rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,691
    almost everything in the chassis that I built (75) was 7/16th coarse thread...
     
    rejeep, Jun 23, 2014
    #2
  3. Jun 25, 2014
    bcurtman

    bcurtman Member

    Rosebud, MO
    Joined:
    Jan 8, 2014
    Messages:
    283
    I concur. Almost all if not all Saginaw boxes and their mounts are 7/16 thread.
     
    bcurtman, Jun 25, 2014
    #3
New Posts