Clutch issue

Hey all,

I have a t90 and 225 and have finally gotten the jeep into a good driver with my new discs, power steering, and hydro clutch.

However, after my first "off-road" excursion (old dirt road with some mud and rocks), the clutch won't work.

Basically, I noticed it was starting to get harder to shift and when I got out to the road and hit my first stop, I couldn't pull it out of second gear, I shut it off then realized my clutch would disengage at all. After starting it in first to get it into gear, I drove the last 5 miles home really slow.

Anyway, I am not leaking fluid and the master cylinder has the same level of fluid as before. My bracket holding the slave isn't bending or hasn't broken. And finally when I took the slave out, I get full throw with no load.

I did notice that my clutch fork was able to move in and out off from the perch. I have not pulled the transmission as I am hoping it is the slave.

Does anyone have experience with the Speedway Pull Type Slave cylinder? I am wondering if the seals inside that are going so under load it won't work?

Penny for your thoughts...

Thank you.