1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Kudos to AtoZ

Discussion in 'Early CJ Vendor Directory' started by nwedgar, Mar 24, 2014.

  1. Mar 24, 2014
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    I struggled a bit with where to post this good vendor report, so if it makes sense somewhere else then by all means move it.

    I don't often post glowing reports of any vendor, but I have to admit to being impressed with the shipping and quality of the stuff I just received from AtoZ fabrication out of PA.

    I'm building my own bumpers for the '74CJ5 and found the AtoZ website while searching for how to get tow points etc. After looking around I settled on a number of items...see the pic below, and ordered on Wednesday last week. Even though it came US mail from PA to GA, I had my parts on Saturday. The quality of the parts are very good and I have no fear that these will hold up to the most extreme abuse.

    So....if you're thinking about building your own bumper, or need one built, I'd at least give their website a browse. They have other stuff too, not just bumpers.

    That disk is for the spare tire, obviously drilled for multiple bolt patterns, but its 3/8" thick steel so its not going anywhere even with extra holes.
    [​IMG]
     
  2. Mar 24, 2014
    73 cj5

    73 cj5 Not ready for the junkyard yet

    Clinton, Mississippi
    Joined:
    Jan 10, 2014
    Messages:
    2,155
    This is neat man. I'll check out the website for sure.
    Just looked and the site looks great. Might just get something from there for the '81.
     
  3. Mar 24, 2014
    bkap

    bkap Gone, but not long gone.

    Tucson, AZ
    Joined:
    Sep 9, 2006
    Messages:
    784
    < duplicate message>
     
    Last edited: Mar 24, 2014
  4. Mar 24, 2014
    bkap

    bkap Gone, but not long gone.

    Tucson, AZ
    Joined:
    Sep 9, 2006
    Messages:
    784
    I used some other their stuff when I built my bumpers several years ago. Good to work with and honest pricing.
     
  5. Mar 26, 2014
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,507
    I have gotten good stuff from them in the past as well, and will use them in the future too. Between them and M.O.R.E. I can normally find the dodad I need and don't have time to make :)
     
  6. Mar 26, 2014
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    A to Z is within ~60 miles from me. Zach (the owner) is a great guy, always has a booth (and is a sponsor of) at the PA Jeeps show every July, with lots of "show special" prices.
    Excellent customer service.
     
    Mopar_tim likes this.
  7. Mar 26, 2014
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    I'm glad I'm not the only one to experience a good vendor.


    ------
    Norm
     
New Posts