1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jeep Seats

Discussion in 'Early CJ5 and CJ6 Tech' started by tarry99, Jul 17, 2013.

  1. Jul 17, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Wanted to plug a member here on this site that goes by "STICH".... that word in itself should tell you what he does........fantastic guy and does some great upholstery work as evidenced by what he did to my old CJ low back seats. He is in Northern California near Jackson..............I even had him install seat heaters for those cold nasty mornings on the trail...............check him out if you need something recovered.
    Before:
    [​IMG]
    After:
    [​IMG]
    After:
    [​IMG]
     
  2. Jul 18, 2013
    tomatolane

    tomatolane Lane

    Chattanooga...
    Joined:
    Sep 3, 2012
    Messages:
    465
    Could they make seat covers that fit these seats

    [​IMG]

    That look like this?

    [​IMG]
     
  3. Jul 18, 2013
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
  4. Jul 18, 2013
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Wow, that looks great. How do they sit? Do you like the bolster height? Is the center panel fabric ventilated?

    Too bad he's so far from here.
     
  5. Jul 18, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784

    They sit very well................the bolster's grab your behind & back ..........obviously getting them on the road will be the ultimate test.............the material in the middle is not ventilated as we agreed that fabric tends to discolor over time and sucks up the dust and dirt from the trail. I'm real happy with the look and fit and looking forward to the heated seat function.........need to now build new seat mounts.
     
New Posts