1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

dana 18 speedometer driven gears

Discussion in 'Early CJ5 and CJ6 Tech' started by OHALE, May 24, 2013.

  1. May 24, 2013
    OHALE

    OHALE New Member

    TEXAS
    Joined:
    Feb 24, 2010
    Messages:
    21
    Just wandering if anyone has used any of the omix-ada speedometer driven gears to calibrate their spedometer. i just found the part numbers and according to the product info they are supposed to fit 55-75 CJ's ,Wranglers, Cherokees sounds to good to be true. how can one gear fit tht many different transfer cases. hope it is true.
    thanks
     
    OHALE, May 24, 2013
    #1
  2. May 25, 2013
    jpc

    jpc Sponsor

    Mead, Co
    Joined:
    Sep 5, 2010
    Messages:
    115
    It is too good to be true.
    I bought one, just to make sure and pointed out the issue to Quadratec, no action to correct.
    Dana 18 driven gear is very small. These are very big, for dana 20.

    Just went and took a look and found this
    http://www.omix-ada.com/dana-18-22-teeth-speedometer-gear.html

    first I have seen ever.
     
    Last edited: May 25, 2013
    jpc, May 25, 2013
    #2
  3. May 28, 2013
    Bob-The-CJ

    Bob-The-CJ Member

    Italy, Texas
    Joined:
    Nov 6, 2012
    Messages:
    386
    Sorry just saw this thread - I could have told you they were different as I have a 61 CJ5 and a 69 Wagoneer
     
    Bob-The-CJ, May 28, 2013
    #3
  4. May 28, 2013
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    Do your homework first before installing any driven gear.
    They must be matched to drive gears.
     
    jpflat2a, May 28, 2013
    #4
New Posts