1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Master Cylinder Top

Discussion in 'Early CJ5 and CJ6 Tech' started by curtcanada, Apr 6, 2013.

  1. Apr 6, 2013
    curtcanada

    curtcanada L, L, and the POH!

    Western Slope, CO
    Joined:
    Nov 25, 2008
    Messages:
    372
    Is there a torque spec for the bolt that holds the top of the master cylinder? Specifically, a stock dual cylinder on a 1970 CJ-5.
     
    curtcanada, Apr 6, 2013
    #1
  2. Apr 6, 2013
    68BuickV6

    68BuickV6 Well-Known Member

    Hesperia, CA.
    Joined:
    Mar 12, 2012
    Messages:
    2,160
    Snug? :?
     
    68BuickV6, Apr 6, 2013
    #2
  3. Apr 7, 2013
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,424
    x2
     
    Twin2, Apr 7, 2013
    #3
  4. Apr 7, 2013
    curtcanada

    curtcanada L, L, and the POH!

    Western Slope, CO
    Joined:
    Nov 25, 2008
    Messages:
    372
    Snug is what I figured. I noticed that the cover plate flexes easily, and with a small socket, it seems like I could keep going, but it's not necessary.
     
    curtcanada, Apr 7, 2013
    #4
New Posts