1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

F head freeze plugs???

Discussion in 'Early CJ5 and CJ6 Tech' started by jasonjp62, Jan 25, 2013.

  1. Jan 25, 2013
    jasonjp62

    jasonjp62 Member

    Pennsboro WV.
    Joined:
    Aug 15, 2009
    Messages:
    799
    I was thinking of changing out the freeze plugs in the F head I'm rebuilding. My question is they look different than most modern plugs I have changed in the past. Can you just tap them out with a screwdriver and hammer? Are they any different than the typical cup style in modern engines?
    Thanks guys,
     
    jasonjp62, Jan 25, 2013
    #1
  2. Jan 25, 2013
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,838
    My f-head manual says "pierce and pry out." I think drill, tap-thread, and pull, may work too.

    Use sealant on the new ones.
     
    PeteL, Jan 25, 2013
    #2
  3. Jan 25, 2013
    jasonjp62

    jasonjp62 Member

    Pennsboro WV.
    Joined:
    Aug 15, 2009
    Messages:
    799
    Thanks man, I guess I should have looked at my manual. I can use the cup style with sealant when replacing the new ones yes?
     
    jasonjp62, Jan 25, 2013
    #3
New Posts