1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T90 Crossmember Mounting Questions

Discussion in 'Early CJ5 and CJ6 Tech' started by Jamco6000, Dec 8, 2012.

Page 2 of 2
  1. Jan 27, 2013
    Jamco6000

    Jamco6000 Member

    Baton Rouge, LA
    Joined:
    Apr 14, 2012
    Messages:
    211
    Ok the T90/D18 currently is not installed on the cj. It was just bolted up to help us try to install the tranny and see exactly where it needed to go. Here is how my combo looks right now.

    [​IMG]

    The distance between the holes on my cross member are ~5 3/8" apart. The studs on the adapter are ~6" apart. Currently installed is mount 912721 for jeepster. Advice, I'm just here scratching my head.....
     
    Jamco6000, Jan 27, 2013
    #21
  2. Jan 28, 2013
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,471
    The mount in Walt's pic is what you have from me. I will see if I can escape between meetings and measure the other bracket I have just in case (pretty sure those came from T86 and T14 setups).
     
    Warloch, Jan 28, 2013
    #22
  3. Jan 28, 2013
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,471
    Just got back from the shop - guess what - I have 1 (actually 2) of the 6 mounts with a 6" spread in the outside holes. Does this look like what you need?

    [​IMG]

    If so, PM me your address again (or e-mail) and I'll get this out to you via flat rate USPS.
     
    Warloch, Jan 28, 2013
    #23
Page 2 of 2
New Posts