1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need P/S pump help

Discussion in 'Early CJ5 and CJ6 Tech' started by 70torino, Dec 7, 2012.

  1. Dec 7, 2012
    70torino

    70torino Member

    Lancaster, MN
    Joined:
    Jul 18, 2010
    Messages:
    89
    I have aquired some brackets and pump for my '67 CJ5 with a 225ci V6. My problem is I don't have a pulley for it. Can anyone help me with this? What type of vehicle do these brackets come from? Any help would be greatly appreciated!
    [​IMG][/IMG]
    [​IMG][/IMG]
    [​IMG][/IMG]
    [​IMG][/IMG]
     
    70torino, Dec 7, 2012
    #1
  2. Dec 7, 2012
    n6ifp

    n6ifp Member

    San Bruno/...
    Joined:
    Sep 15, 2004
    Messages:
    206
    Late 70s GM. Buick ,pontiac, olds v6 and v8. Most are single pulley.
     
    n6ifp, Dec 7, 2012
    #2
  3. Dec 7, 2012
    70torino

    70torino Member

    Lancaster, MN
    Joined:
    Jul 18, 2010
    Messages:
    89
    like this pulley?
    [​IMG][/IMG]
    [​IMG][/IMG]
     
    70torino, Dec 7, 2012
    #3
  4. Dec 7, 2012
    n6ifp

    n6ifp Member

    San Bruno/...
    Joined:
    Sep 15, 2004
    Messages:
    206
    That will work. It is pressed on usually with the end of the pump shaft.
     
    n6ifp, Dec 7, 2012
    #4
  5. Dec 8, 2012
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,421
    you could get it at local auto parts store . don't forget to rent puller/installing tool
     
    Twin2, Dec 8, 2012
    #5
  6. Dec 8, 2012
    oddfirejeeper

    oddfirejeeper Active Member

    Hamilton, MI
    Joined:
    May 5, 2004
    Messages:
    1,253
    is it just me or is the pump a little to far forward to line up with the other pulleys? it is picture 2. i know there is an offset on the pulley but looks a bit far.
     
    oddfirejeeper, Dec 8, 2012
    #6
  7. Dec 8, 2012
    70torino

    70torino Member

    Lancaster, MN
    Joined:
    Jul 18, 2010
    Messages:
    89
    It should line up with the forward pulley on the water pump. I will have to space the fan blade forward though.
     
    70torino, Dec 8, 2012
    #7
New Posts