In the process of expanding overseas in the 50's, Willys started their Brazilian operations in 1952, and the vehicles they developed in the...
Hey folks, I have a question about the ring and pinion gear set in my '67 CJ5 with Dauntless. My axles are offset and the shafts are tapered. The...
Couple things for sale T86 transmission in good shape, ready to drive. $350 Dana 44 carrier and gearset in very good condition. 4.10 ratio....
Looking forward to getting more involved here! I bought this keep when I was 17 (back in 1997) and I’ve had it for 25 years. I’m going to start...
Hey all - first post here. I have a '69 CJ-5, Dauntless, T-14, D18, OD w/ stock 4.88 and a Powr-Lok in the rear. The Powr-Lok decided that all...
I have a 1965 cj5 with a 44 rear end. I would like to install an air locker but need it to be 30 spline not the current 19. Is there any...
When I disassembled my Dana 44 these small parts fell out. The power lock has a two piece cross shaft with a hole through center - I'm thinking...
I finished replacing the pinion bearings on my rear Dana 44 and following the instructions of metalshaper, I set the rotational torque at 15...
I am in the process of rebuilding my rear Dana 44 tapered axle diff and I has bought (or so I thought) all the seals. As I was ready to install...
I had a post on here from a month or so ago about this axle but in that one I misidentified it as a 72. I confirmed with Dana Aftermarket that...
Are the u joints in the front and the read driveshaft the same P/N? I have a D18 and a Dana 25 and a Dana 44. Thanks!
Hi, I need a good rebuild guide to do my rear axle. Also, if anyone have the part numbers of the bearings and seals (shaft seals included) would...
I have recently acquired a 1963 CJ5 with a 1969 Dauntless 225 ci V6. It has a Dana 44 rear end with a solid, 1-piece axle, full floating. On my...
Other than opening the pumpkin cover, how can I know the gearing on my dana 44? Thanks!
I am using a 44 out of (actually still in a) '73 DJ5. I am replacing the axle bearings and seals, changing the gears, and rebuilding the trac...
1969/1970 Jeepster-Commando rear Dana 44, centered axle with tapered shafts and separate hubs, also has a Power-Lok. I am in the process of going...
Separate names with a comma.
