Did you polish the body? If so, that must have been a lot of work! Interesting appearance of the contrast between color and polished metal. Now I...
Even though it was a little while ago that I figured out what the issue ultimately was, I thought I would update this incase someone else has the...
Is there a big difference between proportioning valves pop rate for the drums, and the meter for the front disk? I know the proportioning only...
Well, I thought I figured it out. There is only one thing left that can be wrong. The combination valve is doing something wrong. Either the...
Thanks for the reply. Great advice and I have checked that length. I did back it off a little more. I cannot lock up the brakes, which isn't bad,...
Ok, drove around a little and got things warm. Brakes dragging again, so I started at the MC and cracked the line. Wheel frees up. To get to the...
I guess that makes sense. Wow, seemed like an obvious now, yet someone had to point it out. Thanks Howard. Well, I need to go drive it and warm...
If you have not bought anything yet, look into Toyo Open Country AT II. I have heard really good reviews on the tires toughness and performance....
Thank you for the reply. Yes cracking the bleed valve releases pressure off of both sides. So, flex lines ruled out. To me is says proportioning...
I need to start a new thread as I previously piggybacked on another thread and I need help. Front brakes are dragging, enough to hold be on the...
I think I found my issue. Had to do a little research on M/C operation and found out something I didn't know. When I installed my power booster...
Thanks for the reply. I did have some slack (still is a little), but removed most of it to see what the heck was going on. I can physically pull...
Preamble to my issue; Drove the jeep all last year in Fresno 100+ heat with non-booster brakes no problem. In December I bought a booster M/C...
I was having an issue with my 84 CJ7 brakes sticking. Not a lot, just enough to notice more resistance. I thought is was the drums at first...
After a long search and evaluation of the condition on my knees, I finally found a ride that works for me. After looking at so many CJ5's and some...
Does anyone have a take on this? Before I travel 2 1/2 hours to see this cj, wanted a take on what is pictured. I am concerned with what I see....
Soooo, still looking and I found a 68 on CL. The guy sent me some pics and it looks okay. Potential so far. Then I get this one. What the heck...
If you removed the distributor make sure you didn't install it 180 degrees out. On your crank is your timing makes. Rotate the engine to TDC and...
Fresno where we have 4 seasons. Hot, Hotter, Still hot, and fog/smog.
Thanks guys. I don't feel pressured, I don't have to have one I just want one. And there is no time crunch either. When I think I want something,...
Separate names with a comma.