Need some help figuring out what they have attempted here. I want to clean up this vipers nest. It was working before I started the rocker arm...
HeyO all! Weather finally decent so it's time to get back to fixin' it up. (I managed to get the front suspension done over the winter, need to...
Finally got around to getting the bumper off. What a fine job some PO did mounting it -not. On both side the ends of the channel rail are bent...
If I even keep the Torker... Along the lines of a Tim Allen episode, instead of using the Motorcraft 2100 would a 600CFM Holley be an off the...
What am I not thinking of/missing here? It's still up on blocks, trying to get the springs done, dinked around with the hubs after dinner this...
Finally put together a tank yesterday and fired it up. (30) Gallon barrel, (6) Ø3/4 rebar as anodes, Soda Ash (Sodium Carbonate), 10AMP old...
Finally have the time to put it up on stands. Since it was low in the front I figured the rears were OK. But with the axle hanging free the rears...
Spent the day scrounging around some more boneyards. Saw six CJ-5s, two of which had been flatten just last week. (*CRY*) Popped the hood on one...
I'm posting this over here in 'Early' CJ5 since the springs seem to run from '55-'75, but I'm trying to replace the front springs on my '73. I'm...
Well, went forward and bought Omix-Ada's since they have a (5) years warranty and Crown only had a (1) years. Partially good news is that the box...
I charted the dimensions I came across while trying to determine which replacement shocks (stock) I need for my '73 CJ5. I'm assuming these...
Hi all. I need some input on springs, shackles and shocks. I've been reading and reading and going through so many posts that I think my web...
Separate names with a comma.