I have a complete set of knuckle castings with caps, studs, etc. These came from a D25 on a wagon (according to the fellow member here that I...
I am thinking of moving the tie rods (long tie rod conversion) on my 1947 CJ from below the steering arm to the top. Ream the arms to accept a...
Since I am planning on running a 8K winch and 800 CCA dual type battery on my cj2A, I installed a Delco 105 amp marine 10Si one-wire alternator on...
This is a little weird.. I am re-assembling my '47 2A. Original frame, grille, fenders, hood, windshield, and tailgate. New repop tub… The L134...
I'm rebuilding/restoring my old CJ2A. My 2A has new (stock) suspension. it is more or less complete and sitting on jack stands. The center of...
I have a Dana 41 rear with a special order Warn FF kit, axles, hubs, and premium locking hubs. On the front I have Warn premium hubs on the D25. I...
I am installing IPF H4 Special Halogen Headlamps with 100/170 Halogen bulbs in my flat fender project. To do this, I'd like to have two relays -...
I am considering a 1966 CJ6 that appears to be in decent shape. Has F134 engine, OD, rear FF, etc. Price seems right. Any thing in particular I...
I fitted the R&P dual MC kit. Need to rig a brake light. Does anyone have a part number and photo of a mechanical switch set-up? Thanks, Mike
I have a set of stock 16" X 4.5" rims and a set of 16" X 6" steel rims from a mid 70's FSJ. I am planning on fitting Interco IROK ND tires on the...
Thinking of mounting these in 235/85/R16 on 16 X 6 FSJ wheels for use on my CJ2A. Anyone here have an opinion on their off-road capability?...
I got this part in a package from Willys Overland as a freebie. They only had one, and don't know where it came from. The mounting studs are...
I have read the sticky thread about TBI on a 225 odd-fire and still have a couple questions that you all may be able to help with… I seems that...
I have a set of 5 OE Willys wheels - 4.5X16. I would like to run a 215/85/R16 TUBELESS MT tire on these rims. Will this work, or are the rims...
I know that MD Juan makes all the tubs sold by dealers here, including Omix-Ada. The experience that you describe seems to be universal with...
I am in the decision process on a 4 speed to put behind my 225 V6 - kind of down to an SM420 or a T18. I will probably want to put this drive...
I have a recessed fly wheel for my 225 V6. I am curious if there is some reason for the recessed design? Maybe an attempt increase the weight...
OK, so I have a reasonably well sorted out 225 V6 with everything but a carb/FI system. I also have a nearly completed CJ2A restoration with a few...
I have a CJ2A with a D41 rear with D44 style Warn flanged rear axles. On these are mounted 11" backing plates and brakes from an early 70's CJ5....
I know some of you must be running this setup. I have a perfectly good Delco dizzy for the V6 but I am thinking I might be better off with solid...
Separate names with a comma.