Thanks for the info
So I am trying to put new bushings in my shackle hangers on the frame of my 75 CJ5, the new Daystar bushings seem way to big and won't go in, I...
Well the deep freeze is finally over here in ND. With ice fishing season officially done with its time to get back in the garage a little and get...
Not to hijack your thread but are those RCV axle shafts I see? Just wondering how you like them.
Thank you for all the info, it will help greatly on my rebuild.
I haven't pulled the carrier bearings yet, but I have new bearings and races for it. Where did you get the part numbers from?
Mine has no shim behind the inner pinion bearing or behind the pinion cup, and .048 preload shims. I guess since I'm not changing the gearing...
Thanks for the heads up
I could swear I saw them on O'reillys auto parts web page when I was looking for ball joints for my 75 the other day. I believe the were Moog as well.
I am currently doing a frame off on my 75 cj5, I pulled the rear Dana 44 apart and noticed that this was not the first time someone had been into...
Im going with the Novak set up myself
I'm thinking 2.5" and running 32" tires. I wont do too much off-roading with it. To be honest this thing will spend 75% of the time on pavement...
Well it's been way to long since I have touched this project. Had two kids and built a new house so its been a busy four years. Finally getting...
At what point do you need to start worrying about oil starvation of the pinion bearings with the pinion pointing up so high like that?
Wow, your work is immaculate. The Jeep looks new.
Looks good. Wish my 75 was that clean.
Its should pop out without to much trouble using the drum method. pictures help.
I have been working on her when I can. Took the frame to the sand blaster last week and started tearing into the axles, I'm going to do the rear...
Nice jeep I'm jealous.
Well deer hunting and ice fishing have gotten into the way of my working on the jeep. I had a few hours this afternoon and removed the steering...
Separate names with a comma.