Thanks to all who lent their knowledge to this post I have been on the fence about cutting my losses with the jeep, sunk a couple grand into it...
thanks timgr, actually I made the bumpers. I was doing it quite frequently for wheeling buddies till the steel market went through the roof....
thank you, I saw that and the link to mighty mo's, thats why i posted the year, condition, modifications, and short of actually labeling it...
selling soon whats it worth? I have done a lot of work to it, and now like so many projects it will be sold ( I dont post on here much but i...
my chips are in on this one, I have done a ton of work to the jeep and after about 200 miles i have the same problem. new points and condenser,...
I went all through novak prior to posting, as well as searching for stuff on the ecj5 forums i see they say they offer a t86 kit but when i...
i really want to be sure before i spend some money going to rebuild the trans and transfer case. t86, dana 18, 225v6 everything i have read says...
i used these plans as a basis for mine, thought i'd pass it along http://www.majorleagueduning.com/tech/Brake/Brake.htm
http://www.troutindustries.com/Store.html i get stuff from him for the pivots then the bearings and spindle from tractor supply
i blame the carpet in the jeep i have for the rust that i had to cut out it had literally rotted and rusted to the sheet metal i agree...
hell, who needs a heater when you have a v6 exhaust manifold by your foot? (body is getting a lot of new sheetmetal in the garage) [IMG]
killed a model 20 rear end darn near the same way
I couldn't agrre with you more Mr. Stalin440 the upgrade bug got the better of me and i sold my old jeep, took a break for a few years and got...
rebuilding it and whatever shouldn't be a problem for me, I have done a few VW transmissions in the past. I am still contemplating a 420/465...
and salutations and all of those nice thing I have a badly delapidated 68 plow willys. runs great, looks bad and has a few quirks now the...
Separate names with a comma.