i sand blasted mine and still had to clean some areas with a scraper and wire brush were it was caked on. then had it powder coated im in mine...
well im looking for wider, stronger axles im turning 35" tires and but no means am i easy on the skinny pedal. im looking a 4.3l because of fuel...
1 has any one ran toyota axles and are thy any wider then my 75's? next has any one swapped in a 4.3l chevy v6 with an auto tranny
found it it was the switch thank you
my jeep has a new wiring harness and a new ignition switch. it was running fine this morning then just shut down. if i jump the start solenoid for...
is the t-stat in up side down
have a 4.3l sitting on the floor was just waiting for some thing to happen to this one
dose any one know how much wider stock chevy or dodge 1/2 ton axles are than a jeep cj5
thank all of you for the help pulled the pan and found nothing wrong. guess its time for an engine swap
it runs at 60 psi when engine is warm. i mean when running it and you get on it it will go to 0 then a few seconds later it comes back up to 60....
it doesnt do any thing different when i park on an incline. it dose have a mechanical gage in it
i mean it is 60 at idle and will drop to 40 then to 70 and back to 60 and when i get on it it will drop down to 0
my 304 the oil pressure just started jumping around changed gage, oil/filter and it still dose it. this doesnt seem right to me be has any one...
Separate names with a comma.